HVAC Motor, 1/60 HP, 3000 rpm, 115V, 3.3

Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/60 HP, Nameplate RPM 3,000, No. of Speeds 1, Voltage 115V AC, Full Load Amps 0.75, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 11 in, Motor Enclosure Design Totally Enclosed, Motor Mounting Type Extended Stud, Motor Mounting Position All Angle, Number of Shafts 1

• Mfr #: D402
• Voltage: 115V AC
• Nameplate RPM: 3,000 RPM
• Motor Enclosure Design: Totally Enclosed
• HP: 1/60
• RPM Range: 1,801-3,000
• Ins. Class: B
• Duty: Continuous
• Frame: 3.3
• No. of Speeds: 1
• Standards: CSA Certified, UL Recognized
• Motor Shaft Rotation: CWSE
• Motor Bearings: Sleeve
• Motor Shaft Design: Flat
• Phase: Single
• Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
• Mounting Stud Location: 4/Both Ends
• Shaft Length: 1 3/4 in
• Mounting Pattern: 2-7/8 x 2-7/8
• Body Dia.: 3 5/16 in
• Motor Design: Shaded Pole
• Shaft Dia.: 1/4 in
• Motor Mounting Type: Stud
• Stud/Base Mtg. Pattern: 2-7/8 in x 2-7/8 in
• Application: HVAC/R
• Item: Direct Drive Blower Motor
• Motor Thermal Protection: Auto
• Motor Application: HVAC/R
• Number of Shafts: 1
• Motor Service Factor: 1
• Hz: 60 Hz
• Motor Sub Application: Direct Drive Fan/Blower
• Max. Ambient Temp.: 40 Degrees C
• Length Less Shaft: 2 11/16 in
• Full Load Amps: 0.75
• Capacitor Required: No
• Overall Length: 4 7/16 in
• Usable @ 200V: No
• Mounting Stud Pattern: 2 7/8 in x 2 7/8 in
• Usable @ 208V: No
• Motor Frame Material: Steel
• Weight: 2 lb
• Lead Length: 11 in
• Motor Mounting Position: All Angle